inground vinyl swimming pools structure waterproof led rgb 12v
Surface-mounted pool lights for the Vinyl pool lighting
● Use for vinyl pool
● Material :Engineering ABS light body +Anti-UV PC cover
● VDE standard rubber thread, Standard cable length :2M
● Structure waterproof
● 2 wires RGB synchronous control design; AC 12V power supply design, 50/60HZ
● 38mil high bright LED
● Beam angle:120 °
● Warranty:2 years.
high bright 38mil Red,Green,Blue
Hanging light All passed 30 steps quality control , 100% waterproof at 10m depth, 8 hours LED
agening test,100% inspection before deliver.
How do I change the LED light in my pool?
Change the LED light in your pool by first ensuring that the power is disconnected to your
lighting system. Turn the power off from the mains and double-check by using the light switches.
Unscrew the light fitting, remove it from the pool wall and pull the fitting out of the water onto the
surround. Remove the cover of the light fitting and replace the light bulb. Refit the cover and
ensure that it is watertight before fitting back onto your pool.
Do pool lights use a lot of electricity?
The amount of electricity that your pool lights use will depend on their wattage. For example,
a 300W incandescent light used for 8 hours a day, 365 days a year will consume 876 kWh.
Whereas a 40W LED light used for the same time will only consume 116.8 kWh.
Do LED pool lights get hot?
LED pool lights do not get hot in the same way that incandescent bulbs do. There are no
filaments inside LED lights, so they produce much less heat than incandescent bulbs.
This contributes to their overall efficiency, although they may still get warm to the touch.