36W RGB IP68 structure waterproof led Underwater Light led light
1. 316 screws are riveted on the surface cover, good looking and won't loosen.
2. Constant current driver, high efficiency>90%, assure the LED stable working without input fluctuation
3. 2mm aluminum light board for excellent heat dissipation, 2.0W/(m.k) Thermal conductivity.
4. VDE standard rubber wire, connected with IP68 nickel-plated copper connector.
5. 8 hours aging testing, 30 steps quality inspections, assure the great quality pool light.
6. Lamp succeeded in the IES and Temperature rise test
|Lamp paramater||Material||SS316L body+tempered glass cover+VDE rubber cable|
|Wave Length (nm)||R: 620-630nm|
|Specifics||Operating Temperature (℃)||-20~40℃|
|packing/ shipping||Lamp sizeInner box dimension||
|N.W. / pc||2450g|
|G.W. / pc||2670g|
|Qty. / ctn.||8PCS/CTN|
|G.W. / ctn.||17.0Kg|
|test Site||LED Underwater light (Min)|
|Ambient temperature 28℃||Ambient temperature 40℃|
|Underwater test lighting time(Min)||10||30||90||150||10||30||90||150|
|Light source edge temperature(℃)||55||59||64||70||64||64||70||70|
LED underwater pool light all passed 30 steps quality control , 100% waterproof at 10m depth,
8 hours LED agening test,100% inspection before deliver.
(Conventional bracket) can be suitable for underwater bracket fixing or (with clamp) water
pipe binding installation method, widely used in garden pool, square pool, hotel pool, fountain
and other underwater lighting.
|color box size||230×230×118mm|
Are LED pool lights worth it?
LED pool lights cost more than halogen or incandescent lights. However, most LED bulbs
have an expected lifespan of 30,000 hours, making them a worthwhile investment, especially
when you consider that incandescent lights usually last only 5,000 hours. Best of all, LED lights
use a fraction of the energy compared to incandescent lights, so they’ll save you money in the long term.
How do I change the LED light in my pool?
Change the LED light in your pool by first ensuring that the power is disconnected to your lighting
system. Turn the power off from the mains and double-check by using the light switches. Unscrew
the light fitting, remove it from the pool wall and pull the fitting out of the water onto the surround.
Remove the cover of the light fitting and replace the light bulb. Refit the cover and ensure that it is
watertight before fitting back onto your pool.
Do pool lights use a lot of electricity?
The amount of electricity that your pool lights use will depend on their wattage. For example, a 300W
incandescent light used for 8 hours a day, 365 days a year will consume 876 kWh. Whereas a 40W
LED light used for the same time will only consume 116.8 kWh.